Cooling Fans; Ac Power Receptacle; Figure 5 Removing The Cascade Module Filler Panel - Nortel 2000 Using Manual
Business policy switch
Hide thumbs
Also See for 2000:
- Software reference manual (359 pages) ,
- User manual (86 pages) ,
- Hardware installation manual (26 pages)
Table of Contents
Advertisement
44
Figure 5 Removing the cascade module filler panel
9744FA
Cooling fans
Three cooling fans are located on one side of the Business Policy Switch to
provide cooling for the internal components. (See
Figure 1 on page
36.) When
you install the switch, be sure to allow enough space on both sides of the switch
for adequate air flow. See Installing the Business Policy Switch 2000 for detailed
information.
AC power receptacle
The AC power receptacle accepts the AC power cord (supplied). For installation
outside of North America, make sure that you have the proper power cord for your
region. Any cord used must have a CEE-22 standard V female connector on one
end and must meet the IEC 320-030 specifications.
Table 4
lists specifications for
international power cords.
Using the Business Policy Switch 2000 Version 1.2
Advertisement
Table of Contents
Troubleshooting
