Table of Contents
Advertisement
164
Chapter 3 Using the console interface
Table 37 TELNET Configuration screen fields (continued)
Field
Description
Allowed Source
Specifies up to 10 user-assigned host IP addresses that are allowed Telnet access to the
IP Address
CI.
Default Value:
Range:
Allowed Source
Specifies up to 10 user-assigned allowed source address masks. The remote IP address
Mask
is masked with the Allowed Source Mask and, if the resulting value equals the Allowed
Source IP address, the connection is allowed.
For example, a connection would be allowed with the following settings:
Remote IP address = 192.0.1.5
Allowed Source IP Address = 192.0.1.0
Allowed Source Mask = 255.255.255.0
Default Value:
Range:
Software Download screen
The Software Download screens
BayStack 380 Switch software image that is located in nonvolatile flash memory.
212859-A
0.0.0.0 (no IP address assigned)
Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, separated by a decimal point
0.0.0.0 (no IP mask assigned)
Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, separated by a decimal point
Caution: Do not interrupt power to the device during the software
download process. If the power is interrupted, the firmware image can
become corrupted.
Achtung: Unterbrechen Sie die Stromzufuhr zum Gerät nicht, während
die Software heruntergeladen wird. Bei Unterbrechung der Stromzufuhr
kann das Firmware-Image beschädigt werden.
Attention: Ne pas couper l'alimentation de l'appareil pendant le
chargement du logiciel. En cas d'interruption, le programme résident
peut être endommagé.
(Figure 80
and
Figure
81) allow you to revise the
Advertisement
Table of Contents
