Software Download - Nortel BayStack 350 Series Manual

Software Download

The Software Download screen
350 switch software image that is located in nonvolatile flash memory. To
download the BayStack 350 switch software image, a properly configured Trivial
File Transfer Protocol (TFTP) server must be present in your network, and the
switch must have an IP address. (See "IP Configuration" on
how to configure the switch's IP address.)
Choose Software Download (or press s) from the main menu to open the Software
Download screen.
You can monitor the software download process by observing the BayStack 350
switch LEDs (see
page
Caution: Do not interrupt power to the device during the software download
process. If the power is interrupted, the firmware image can become corrupted.
Image Filename:
TFTP Server IP Address:
Start TFTP Load of New Image:
The Software Download process has started.
switch before the process has completed (approximately 10 minutes).
Enter text, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-31. Software Download screen
893-00992-E
"LED Indications During the Download
3-72).
Software Download
(Figure 3-31) allows you to revise the BayStack
[ b350_300.img ]
[ 192.0.1.12 ]
[ Yes ]
Do NOT power down the
Press Ctrl-C to return to Main Menu.
Using the Console Interface
page 3-10 to learn
Process" on
3-71