Secondary Accounting (Hwtacacs Scheme View) - HP FlexNetwork 7500 Series Command Reference Manual

Syntax
retry stop-accounting retries
undo retry stop-accounting
Default
The maximum number of transmission attempts for individual HWTACACS stop-accounting
requests is 100.
Views
HWTACACS scheme view
Predefined user roles
network-admin
mdc-admin
Parameters
retries: Specifies the maximum number of transmission attempts for HWTACACS stop-accounting
requests. The value range is 1 to 300.
Examples
# In HWTACACS scheme hwt1, set the maximum number of HWTACACS stop-accounting attempts
to 300.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] retry stop-accounting 300
Related commands
display stop-accounting-buffer (for HWTACACS)
timer response-timeout (HWTACACS scheme view)

secondary accounting (HWTACACS scheme view)

Use secondary accounting to specify a secondary HWTACACS accounting server.
Use undo secondary accounting to remove a secondary HWTACACS accounting server.
Syntax
secondary accounting { host-name | ipv4-address | ipv6 ipv6-address } [ port-number | key
{ cipher | simple } string | single-connection | vpn-instance vpn-instance-name ] *
undo secondary accounting [ { host-name | ipv4-address | ipv6 ipv6-address } [ port-number |
vpn-instance vpn-instance-name ] * ]
Default
No secondary HWTACACS accounting servers are specified.
Views
HWTACACS scheme view
Predefined user roles
network-admin
mdc-admin
132