Ipv6 Source Binding (Interface View) - HP FlexNetwork 7500 Series Command Reference Manual

Related commands
display ip verify source excluded

ipv6 source binding (interface view)

Use ipv6 source binding to configure a static IPv6SG binding.
Use undo ipv6 source binding to delete the static IPv6SG bindings configured on an interface.
Syntax
ipv6 source binding { ip-address ipv6-address | ip-address ipv6-address mac-address
mac-address | mac-address mac-address }
undo ipv6 source binding { all | ip-address ipv6-address | ip-address ipv6-address mac-address
mac-address | mac-address mac-address }
Default
No static IPv6SG bindings exist on an interface.
Views
Layer 2 Ethernet interface view
Layer 3 Ethernet interface view
VLAN interface view
Predefined user roles
network-admin
mdc-admin
Parameters
all: Removes all the static IPv6SG bindings on the interface.
ip-address ipv6-address: Specifies an IPv6 address for the static binding. The IPv6 address cannot
be an all-zero address, a multicast address, or a loopback address.
mac-address mac-address: Specifies a MAC address for the static binding. The MAC address must
be in H-H-H format, and cannot be all 0s, all Fs (a broadcast MAC address), or a multicast MAC
address.
Usage guidelines
Static IPv6SG bindings on an interface filter incoming IPv6 packets, and check user validity by
cooperating with the ND attack detection feature.
You cannot configure static IPv6SG bindings on a service loopback interface.
Examples
# Configure a static IPv6SG binding on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] ipv6 source binding ip-address 2001::1 mac-address
0002-0002-0002
Related commands
display ipv6 source binding
display ipv6 source binding pd
ipv6 source binding (system view)
613