Dot1X Handshake - HP FlexNetwork 7500 Series Command Reference Manual

3. Assigns the port to the 802.1X guest VSI after the maximum number of request attempts set by
using the dot1x retry command is reached.
If you use the undo command without any keyword, the command disables both EAPOL-triggered
and new MAC-triggered 802.1X guest VSI assignment delays on a port.
Examples
# Enable EAPOL-triggered 802.1X guest VSI assignment delay on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x guest-vsi-delay eapol
Related commands
display dot1x
dot1x guest-vsi
dot1x retry
dot1x timer tx-period

dot1x handshake

Use dot1x handshake to enable the online user handshake feature.
Use undo dot1x handshake to disable the online user handshake feature.
Syntax
dot1x handshake
undo dot1x handshake
Default
The online user handshake feature is enabled.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
The online user handshake feature enables the device to periodically send EAP-Request/Identity
packets to the client for verifying the connectivity status of online 802.1X users. The device sets a
user to the offline state if it does not receive an EAP-Response/Identity packet from the user after
making the maximum attempts within the handshake timer. To set the handshake timer, use the
dot1x timer handshake-period command. To set the maximum handshake attempts, use the
dot1x retry command.
Examples
# Enable the online user handshake feature on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x handshake
185