Sftp Client Source - HP FlexNetwork 7500 Series Command Reference Manual

Default
The source IPv6 address for SFTP packets is not configured. The SFTP client automatically selects
an IPv6 address for SFTP packets in compliance with RFC 3484.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-type interface-number: Specifies a source interface by its type and number. The
SFTP packets use the longest-matching IPv6 address of the specified interface as their source
address.
ipv6 ipv6-address: Specifies a source IPv6 address.
Usage guidelines
This command takes effect on all IPv6 SFTP connections. The source IPv6 address specified in the
sftp ipv6 command takes effect only on the current IPv6 SFTP connection. If you specify the source
IPv6 address both in this command and the sftp ipv6 command, the source IPv6 address specified
in the sftp ipv6 command takes effect.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Specify 2:2::2:2 as the source IPv6 address for SFTP packets.
<Sysname> system-view
[Sysname] sftp client ipv6 source ipv6 2:2::2:2
Related commands
display sftp client source

sftp client source

Use sftp client source to configure the source IPv4 address for SFTP packets that are sent by the
SFTP client.
Use undo sftp client source to restore the default.
Syntax
sftp client source { interface interface-type interface-number | ip ip-address }
undo sftp client source
Default
The source IPv4 address for SFTP packets is not configured. The SFTP client uses the primary IPv4
address of the output interface specified in the routing entry as the source IPv4 address of the SFTP
packets.
Views
System view
Predefined user roles
network-admin
mdc-admin
481