Mac-Authentication Guest-Vsi Auth-Period - HP FlexNetwork 7500 Series Command Reference Manual

mac-authentication guest-vsi auth-period

Use mac-authentication guest-vsi auth-period to set the interval at which the device
authenticates users in the MAC authentication guest VSI.
Use undo mac-authentication guest-vsi auth-period to restore the default.
Syntax
mac-authentication guest-vsi auth-period period-value
undo mac-authentication guest-vsi auth-period
Default
The device authenticates users in the MAC authentication guest VSI every 30 seconds.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
period-value: Specifies the authentication interval for users in the MAC authentication guest VSI.
The value range is 1 to 3600, in seconds.
Examples
# Set the authentication interval to 150 seconds for users in the MAC authentication guest VSI on
Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] mac-authentication guest-vsi auth-period 150
Related commands
display mac-authentication
mac-authentication guest-vsi
mac-authentication host-mode
Use mac-authentication host-mode multi-vlan to enable MAC authentication multi-VLAN mode
on a port.
Use undo mac-authentication host-mode to restore the default.
Syntax
mac-authentication host-mode multi-vlan
undo mac-authentication host-mode
Default
MAC authentication multi-VLAN mode is disabled on a port. When the port receives a packet
sourced from an authenticated MAC address in a VLAN not matching the existing MAC-VLAN
mapping, the device logs off and reauthenticates the user.
219