Portal Web-Server - HP FlexNetwork 7500 Series Command Reference Manual

undo portal web-proxy port { port-number | all }
Default
No port numbers of Web proxy servers are specified. Proxied HTTP requests are dropped.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
port-number: Specifies the port number of a Web proxy server. The value range for this argument is
1 to 65535.
all: Specifies all port numbers of Web proxy servers.
Usage guidelines
To allow HTTP requests proxied by a Web proxy server to trigger portal authentication, specify the
port number of the Web proxy server on the device. If a Web proxy server port is not specified on the
device, HTTP requests proxied by the Web proxy server are dropped, and portal authentication
cannot be triggered.
You can configure this command multiple times to specify multiple port numbers of Web proxy
servers.
If a user's browser uses the Web Proxy Auto-Discovery (WPAD) protocol to discover Web proxy
servers, you must perform the following tasks on the device:
•
Specify the port numbers of the Web proxy servers on the device.
•
Configure portal-free rules to allow user packets destined for the IP address of the WPAD
server to pass without authentication.
If portal users enable Web proxy in their browsers, the users must add the IP address of the portal
authentication server as a proxy exception in their browsers. Then, HTTP packets that the users
send to the portal authentication server will not be sent to Web proxy servers.
You cannot specify Web proxy server port 443 on the device.
Examples
# Specify Web proxy server port 8080.
<Sysname> system-view
[Sysname] portal web-proxy port 8080
Related commands
portal enable method

portal web-server

Use portal web-server to create a portal Web server and enter its view, or enter the view of an
existing portal Web server.
Use undo portal web-server to delete a portal Web server.
Syntax
portal web-server server-name
undo portal web-server server-name
296