X Client Commands - HP FlexNetwork 7500 Series Command Reference Manual

802.1X client commands

display dot1x supplicant
Use display dot1x supplicant to display 802.1X client authentication information.
Syntax
display dot1x supplicant [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify an interface, this command displays 802.1X client authentication information for all
interfaces.
Examples
# Display 802.1X client authentication information on Ten-GigabitEthernet 1/0/1.
<Sysname> display dot1x supplicant interface ten-gigabitethernet 1/0/1
Ten-GigabitEthernet1/0/1
Username
EAP method
Dot1x supplicant
Anonymous identifier : bbb
SSL client policy
FSM state
EAPOL-Start packets
Table 106 Command output
Field
Username
EAP method
Dot1x supplicant
: aaa
: PEAP-MSCHAPv2
: Enabled
: policy_1
: Init
: 0
Description
802.1X client username.
802.1X client EAP authentication method:
•
MD5.
•
PEAP-GTC.
•
PEAP-MSCHAPv2.
•
TTLS-GTC.
•
TTLS-MSCHAPv2.
Status of the 802.1X client feature:
•
Enabled.
•
Disabled.
689