If-Match - HP FlexNetwork 7500 Series Command Reference Manual

Table 30 Command output
Field
Rule
Type
Action
Status
Source
IP
Mask
Prefix length
VLAN
Protocol
Destination
Port

if-match

Use if-match to configure a match rule for URL redirection.
Use undo if-match to delete a URL redirection match rule.
Syntax
if-match { original-url url-string redirect-url url-string [ url-param-encryption { aes | des } key
{ cipher | simple } string ] | user-agent string redirect-url url-string }
undo if-match { original-url url-string | user-agent user-agent }
Default
No URL redirection match rules exist.
Views
Portal Web server view
Predefined user roles
network-admin
mdc-admin
Description
Number of the Web redirect rule.
Type of the Web redirect rule:
•
Static—Static Web redirect rule, generated when the Web redirect
feature takes effect.
•
Dynamic—Dynamic Web redirect rule, generated when a user visits a
redirect webpage.
Action in the Web redirect rule:
•
Permit—Allows packets to pass.
•
Redirect—Redirects the packets.
Status of the Web redirect rule:
•
Active—The Web redirect rule is effective.
•
Inactive—The Web redirect rule is not effective.
Source information in the Web redirect rule.
Source IP address.
Subnet mask of the source IPv4 address.
Prefix length of the source IPv6 address.
Source VLAN. If not specified, this field displays Any.
Transport layer protocol permitted by the Web redirect rule. This field
always displays TCP.
Destination information in the Web redirect rule.
Destination transport layer port number. The default port number is 80.
257