Ipv6 Source Binding (System View) - HP FlexNetwork 7500 Series Command Reference Manual

ipv6 source binding (system view)

Use ipv6 source binding to configure a global static IPv6SG binding.
Use undo ipv6 source binding to delete one or all global static IPv6SG bindings.
Syntax
ipv6 source binding ip-address ipv6-address mac-address mac-address
undo ipv6 source binding { all | ip-address ipv6-address mac-address mac-address }
Default
No global static IPv6SG bindings exist.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv6-address ipv6-address: Specifies the IPv6 address for the static binding. The IPv6 address
cannot be an all-zero address, a multicast address, or a loopback address.
mac-address mac-address: Specifies the MAC address for the static binding. The MAC address
must be in H-H-H format, and cannot be all 0s, all Fs (a broadcast MAC address), or a multicast MAC
address.
all: Removes all global static IPv6SG bindings.
Usage guidelines
A global static IPv6SG binding takes effect on all interfaces.
Examples
# Configure a global static IPv6SG binding.
<Sysname> system-view
[Sysname] ipv6 source binding ipv6-address 2001::1 mac-address 0002-0002-0002
Related commands
display ipv6 source binding
display ipv6 source binding pd
ipv6 source binding (interface view)
ipv6 verify source
Use ipv6 verify source to enable IPv6SG on an interface.
Use undo ipv6 verify source to disable IPv6SG on an interface.
Syntax
ipv6 verify source { ip-address | ip-address mac-address | mac-address }
undo ipv6 verify source
Default
The IPv6SG feature is disabled on an interface.
614