Blacklist Ip - HP FlexNetwork 7500 Series Command Reference Manual

Syntax
blacklist global enable
undo blacklist global enable
Default
The global blacklist feature is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
If you enable the global blacklist feature, the blacklist feature is enabled on all interfaces.
Examples
# Enable the global blacklist feature.
<Sysname> system-view
[Sysname] blacklist global enable
Related commands
blacklist enable

blacklist ip

blacklist ip
Use blacklist ip to add an IPv4 blacklist entry.
Use undo blacklist ip to delete an IPv4 blacklist entry.
Syntax
blacklist ip source-ip-address [ vpn-instance vpn-instance-name ] [ timeout minutes ]
undo blacklist ip source-ip-address [ vpn-instance vpn-instance-name ]
Default
No IPv4 blacklist entries exist.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
source-ip-address: Specifies an IPv4 address for the blacklist entry. Packets sourced from this
address will be dropped.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the blacklist
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not
specify this option if the blacklist is on the public network.
529