Tcp-Port - HP FlexNetwork 7500 Series Command Reference Manual

Default
The type of the MAC binding server is IMC.
Views
MAC binding server view
Predefined user roles
network-admin
mdc-admin
Parameters
imc: Specifies the MAC binding server type as IMC.
Examples
# Specify the type of MAC binding server as imc.
<Sysname> system-view
[Sysname] portal mac-trigger-server mts
[Sysname-portal-mac-trigger-server-mts] server-type imc

tcp-port

Use tcp-port to configure a listening TCP port for the local portal Web service.
Use undo tcp-port to restore the default.
Syntax
tcp-port port-number
undo tcp-port
Default
The listening TCP port number for HTTP is 80 and that for HTTPS is the TCP port number set by the
portal local-web-server command.
Views
Local portal Web service view
Predefined user roles
network-admin
mdc-admin
Parameters
port-number: Specifies the listening TCP port number in the range of 1 to 65535.
Usage guidelines
To use the local portal Web service, make sure the port number in the portal Web server URL and the
port number configured in this command are the same.
For successful local portal authentication, follow these guidelines:
•
Do not configure the listening TCP port number for a local portal Web service as the port
number used by a known protocol. For example, do not specify port numbers 21 and 23, which
are used by FTP and Telnet, respectively.
•
Do not configure the HTTP listening port number as the default HTTPS listening port number
443.
301