Table of Contents
Advertisement
Usage guidelines
You must edit the default authentication pages, compress them to a .zip file, and then upload the file
to the root directory of the storage medium of the device.
After you use the default-logon-page command to specify the file, the device decompresses the file
to get the authentication pages. The device then sets them as the default authentication pages for
local portal authentication.
For successful local portal authentication, you must specify the default portal authentication page file
for the local portal Web service.
Examples
# Specify file pagefile1.zip as the default authentication page file for local portal authentication.
<Sysname> system-view
[Sysname] portal local-web-server http
[Sysname-portal-local-websvr-http] default-logon-page pagefile1.zip
Related commands
portal local-web-server
display portal
Use display portal to display portal configuration and portal running state.
Syntax
display portal interface interface-type interface-number
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
Examples
# Display portal configuration and portal running state on VLAN-interface 2.
<Sysname> display portal interface vlan-interface 2
Portal information of Vlan-interface2
NAS-ID profile: aaa
Authorization : Strict checking
ACL
User profile
IPv4:
Portal status: Enabled
Portal authentication method: Direct
Portal web server: wbs
Portal mac-trigger-server: mts
Authentication domain: my-domain
: Enabled
: Disabled
235
Advertisement
Table of Contents
