Table of Contents
Advertisement
undo radius attribute extended [ attribute-name ]
Default
No user-defined extended RADIUS attributes exist.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
attribute-name: Specifies the RADIUS attribute name, a case-insensitive string of 1 to 63 characters.
The name must be unique among all RADIUS attributes, including the standard and extended
RADIUS attributes.
vendor vendor-id: Specifies a vendor ID in the range of 1 to 65535. If you do not specify a vendor ID,
the device processes the RADIUS attribute as a standard RADIUS attribute.
code attribute-code: Specifies the ID of the RADIUS attribute in the attribute set. The value range for
the attribute-code argument is 1 to 255.
type: Specifies a data type for the attribute content.
binary: Binary type.
date: Date type.
integer: Integer type.
interface-id: Interface ID type.
ip: IPv4 address type.
ipv6: IPv6 address type.
ipv6-prefix: IPv6 address prefix type.
octets: Octet type.
string: String type.
Usage guidelines
To support the proprietary RADIUS attributes of other vendors, perform the following tasks:
1.
Use this command to define the attributes as extended RADIUS attributes.
2.
Use the attribute convert command to map the extended RADIUS attributes to attributes
supported by the system.
3.
Use the attribute translate command to enable the RADIUS attribute translation feature for the
mappings to take effect.
To cooperate with RADIUS servers of a third-party vendor, map attributes that cannot be identified by
the server to server-supported attributes.
Two RADIUS attributes cannot have the same combination of attribute name, vendor ID, and
attribute ID.
If you do not specify a RADIUS attribute name, the undo radius attribute extended command
deletes all user-defined extended RADIUS attributes.
Examples
# Define a string-type extended RADIUS attribute with attribute name Owner-Password, vendor ID
122, and attribute ID 80.
<Sysname> system-view
91
Advertisement
Table of Contents
