Portal Server - HP FlexNetwork 7500 Series Command Reference Manual

portal server

Use portal server to create a portal authentication server and enter its view, or enter the view of an
existing portal authentication server.
Use undo portal server to delete the specified portal authentication server.
Syntax
portal server server-name
undo portal server server-name
Default
No portal authentication servers exist.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
server-name: Specifies a portal authentication server by its name, a case-sensitive string of 1 to 32
characters.
Usage guidelines
In portal authentication server view, you can configure the following parameters and features for the
portal authentication server:
•
IP address of the server.
•
Destination UDP port number used by the device to send unsolicited portal packets to the portal
authentication server.
•
MPLS L3VPN where the portal authentication server resides.
•
Pre-shared key for communication between the access device and the server.
•
Server detection feature.
You can configure multiple portal authentication servers for an access device.
Examples
# Create portal authentication server pts and enter its view.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts]
Related commands
display portal server
portal user-detect
Use portal user-detect to enable online detection of IPv4 portal users.
Use undo portal user-detect to disable online detection of IPv4 portal users.
Syntax
portal user-detect type { arp | icmp } [ retry retries ] [ interval interval ] [ idle time ]
293