HP FlexNetwork 7500 Series Command Reference Manual page 251

Hide thumbs Also See for FlexNetwork 7500 Series:
Table of Contents

Advertisement

Pre-auth domain: abc
User-dhcp-only: Enabled
Pre-auth IP pool: ab
Max Portal users: Not configured
Bas-ip: Not configured
User detection : Type: ICMP
Action for server detection:
Server type
Web server
Portal server
Layer3 source network:
IP address
1.1.1.1
Destination authentication subnet:
IP address
2.2.2.2
IPv6:
portal status: Disabled
Portal authentication method: Disabled
Portal web server: Not configured
Portal mac-trigger-server: Not configured
Authentication domain: Not configured
Pre-auth domain: Not configured
User-dhcp-only: Disabled
Pre-auth IP pool: Not configured
Max Portal users: Not configured
Bas-ipv6:Not configured
User detection: Not configured
Action for server detection:
Server type
--
Layer3 source network:
IP address
Destination authentication subnet:
IP address
Table 22 Command output
Field
Portal information of interface
NAS-ID profile
Authorization
Strict checking
IPv4
IPv6
Interval: 300s
Server name
wbs
pts
Mask
255.255.0.0
Mask
255.255.255.0
Server name
--
Description
Portal configuration on the interface.
NAS-ID profile on the interface.
Authorization information type: ACL.
Whether strict checking is enabled on portal authorization information.
IPv4 portal configuration.
IPv6 portal configuration.
236
Attempts: 5
Idle time: 180s
Action
fail-permit
fail-permit
Action
--
Prefix length
Prefix length

Advertisement

Table of Contents
loading

Table of Contents