HP FlexNetwork 7500 Series Command Reference Manual page 564

Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify
the device. If you do not specify a card, this command displays information about IPv6 scanning
attack victims for all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. This option is available only when you specify the
device. If you do not specify a card, this command displays information about IPv6 scanning attack
victims for all cards. (In IRF mode.)
count: Displays the number of matching IPv6 scanning attack victims.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPv6 scanning
attack victims.
Examples
# (In standalone mode.) Display information about all IPv6 scanning attack victims.
<Sysname> display attack-defense scan victim ipv6
Slot 1:
IPv6 address
1002::20
Slot 2:
IPv6 address
# (In standalone mode.) Display the number of IPv6 scanning attack victims.
<Sysname> display attack-defense scan victim ipv6 count
Slot 1:
Totally 1 victim IP addresses.
Slot 2:
Totally 0 victim IP addresses.
Table 83 Command output
Field
Totally 1 victim IP addresses
IPv6 address
VPN instance
Detected on
Duration(min)
VPN instance Detected on
-- Local
VPN instance Detected on
Description
Total number of IPv6 scanning attack victims.
IPv6 address of the victim.
MPLS L3VPN instance to which the victim IPv6 address belongs. If the
victim IPv6 address is on the public network, this field displays hyphens
(--).
Where the attack is detected: the device (Local).
The amount of time the attack lasts, in minutes.
549
Duration(min)
28
Duration(min)