Portal Domain (Interface View) - HP FlexNetwork 7500 Series Command Reference Manual

portal domain (interface view)

Use portal [ ipv6 ] domain to specify a portal authentication domain on an interface. All portal users
accessing through the interface must use the authentication domain.
Use undo portal [ ipv6 ] domain to delete the configured portal authentication domain.
Syntax
portal [ ipv6 ] domain domain-name
undo portal [ ipv6 ] domain
Default
No portal authentication domain is configured on an interface.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv6: Specifies an authentication domain for IPv6 portal users. Do not specify this keyword for IPv4
portal users.
domain-name: Specifies an ISP authentication domain by its name, a case-insensitive string of 1 to
255 characters.
Usage guidelines
You can specify both an IPv4 portal authentication domain and an IPv6 portal authentication domain
on an interface.
Do not specify the ipv6 keyword for IPv4 portal users.
Examples
# Specify the authentication domain as my-domain for IPv4 portal users on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname–Vlan-interface100] portal domain my-domain
Related commands
display portal
portal enable (interface view)
Use portal [ ipv6 ] enable to enable portal authentication.
Use undo portal [ ipv6 ] enable to disable portal authentication.
Syntax
portal enable method { direct | layer3 | redhcp }
portal ipv6 enable method { direct | layer3 }
undo portal [ ipv6 ] enable
270