Arp Attack Detection Commands - HP FlexNetwork 7500 Series Command Reference Manual

Predefined user roles
network-admin
mdc-admin
Examples
# Enable authorized ARP on VLAN-interface 200.
<Sysname> system-view
[Sysname] interface vlan-interface 200
[Sysname-Vlan-interface200] arp authorized enable

ARP attack detection commands

arp detection enable
Use arp detection enable to enable ARP attack detection.
Use undo arp detection enable to disable ARP attack detection.
Syntax
arp detection enable
undo arp detection enable
Default
ARP attack detection is disabled.
Views
VLAN view
VSI view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable ARP attack detection for VLAN 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] arp detection enable
# Enable ARP attack detection for VSI vsi1.
<Sysname> system-view
[Sysname] vsi vsi1
[Sysname-vsi-vsi1] arp detection enable
Related commands
arp detection rule
arp detection log enable
Use arp detection log enable to enable ARP attack detection logging.
Use undo arp detection log enable to disable ARP attack detection logging.
628