Display Radius Scheme - HP FlexNetwork 7500 Series Command Reference Manual

display radius scheme

Use display radius scheme to display RADIUS scheme configuration.
Syntax
display radius scheme [ radius-scheme-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of 1 to 32
characters. If you do not specify a RADIUS scheme, this command displays the configuration of all
RADIUS schemes.
Examples
# Display the configuration of all RADIUS schemes.
<Sysname> display radius scheme
Total 1 RADIUS schemes
------------------------------------------------------------------
RADIUS scheme name: radius1
Index : 0
Primary authentication server:
Host name: Not configured
IP : 2.2.2.2
VPN : vpn1
State: Active
Test profile: 132
Probe username: test
Probe interval: 60 minutes
Weight: 40
Primary accounting server:
Host name: Not configured
IP : 1.1.1.1
VPN : Not configured
State: Active
Weight: 40
Second authentication server:
Host name: Not configured
IP : 3.3.3.3
VPN : Not configured
State: Block
Test profile: Not configured
Port: 1812
Port: 1813
Port: 1812
79