Port-Security Mac-Address Security - HP FlexNetwork 7500 Series Command Reference Manual

lost at reboot. Use this command when you want to clear all sticky MAC addresses after a device
reboot.
You can display dynamic secure MAC addresses by using the display port-security mac-address
security command.
The undo port-security mac-address dynamic command converts all dynamic secure MAC
addresses on the port to sticky MAC addresses. You can manually configure sticky MAC addresses.
Examples
# Enable the dynamic secure MAC feature on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port-security mac-address dynamic
Related commands
display port-security
display port-security mac-address security

port-security mac-address security

Use port-security mac-address security to add a secure MAC address.
Use undo port-security mac-address security to remove a secure MAC address.
Syntax
In Layer 2 Ethernet interface view:
port-security mac-address security [ sticky ] mac-address vlan vlan-id
undo port-security mac-address security [ sticky ] mac-address vlan vlan-id
In system view:
port-security mac-address security [ sticky ] mac-address interface interface-type
interface-number vlan vlan-id
undo port-security mac-address security [ [ mac-address [ interface interface-type
interface-number ] ] vlan vlan-id ]
Default
No manually configured secure MAC address entries exist.
Views
System view
Layer 2 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
sticky: Specifies the MAC address type as sticky. If you do not specify this keyword, the command
configures a static secure MAC address.
mac-address: Specifies a MAC address, in H-H-H format.
interface interface-type interface-number: Specifies a port by its type and number.
322