[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x supplicant eap-method peap-gtc
Related commands
display dot1x supplicant
dot1x supplicant enable
dot1x supplicant enable
Use dot1x supplicant enable to enable the 802.1X client feature.
Use undo dot1x supplicant enable to disable the 802.1X client feature.
Syntax
dot1x supplicant enable
undo dot1x supplicant enable
Default
The 802.1X client feature is disabled.
Views
Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Make sure you have configured 802.1X authentication on the authenticator before you use this
command.
Examples
# Enable the 802.1X client feature on a port.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x supplicant enable
Related commands
display dot1x supplicant
dot1x supplicant mac-address
Use dot1x supplicant mac-address to configure an 802.1X client MAC address used for 802.1X
client authentication.
Use undo dot1x supplicant mac-address to restore the default.
Syntax
dot1x supplicant mac-address mac-address
undo dot1x supplicant mac-address
692