Table of Contents
Advertisement
Examples
# (In standalone mode.) Display all IPv6 flood attack detection and prevention statistics.
<Sysname> display attack-defense flood statistics ipv6
Slot 1:
IPv6 address
1::4
1::5
Slot 2:
IPv6 address
1::6
# (In standalone mode.) Display the number of IPv6 addresses that are protected against flood
attacks.
<Sysname> display attack-defense flood statistics ipv6 count
Slot 1:
Totally 2 flood entries.
Slot 2:
Totally 1 flood entries.
Table 75 Command output
Field
IPv6 address
VPN
Detected on
Detect type
State
PPS
Dropped
Totally 2 flood entries
display attack-defense policy
Use display attack-defense policy to display attack defense policy configuration.
Syntax
display attack-defense policy [ policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
VPN
Detected on
--
Local
--
Local
VPN
Detected on
--
Local
Description
Protected IPv6 address.
MPLS L3VPN instance to which the protected IPv6 address belongs. If the
protected IPv6 address is on the public network, this field displays
hyphens (--).
Where the attack is detected: the device (Local).
Type of the detected flood attack.
Whether the device is attacked:
•
Attacked.
•
Normal.
Number of packets sent to the IPv6 address per second.
Number of attack packets dropped by the device.
Total number of IPv6 addresses that are protected.
Detect type
State
ACK-FLOOD
Normal
SYN-FLOOD
Normal
Detect type
State
DNS-FLOOD
Normal
536
PPS
Dropped
1000
111111111
1000
22222222
PPS
Dropped
1000
12569985
Advertisement
Table of Contents
