Udp-Flood Detect Non-Specific - HP FlexNetwork 7500 Series Command Reference Manual

Related commands
udp-flood action

udp-flood detect non-specific

udp-flood threshold
udp-flood detect non-specific
Use udp-flood detect non-specific to enable global UDP flood attack detection.
Use undo udp-flood detect non-specific to disable global UDP flood attack detection.
Syntax
udp-flood detect non-specific
undo udp-flood detect non-specific
Default
Global UDP flood attack detection is disabled.
Views
Attack defense policy view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
The global UDP flood attack detection applies to all IP addresses except for those specified by the
udp-flood detect command. The global detection uses the global trigger threshold set by the
udp-flood threshold command and global actions specified by the udp-flood action command.
Examples
# Enable global UDP flood attack detection in attack defense policy atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] udp-flood detect non-specific
Related commands
udp-flood action
udp-flood detect
udp-flood threshold
udp-flood threshold
Use udp-flood threshold to set the global threshold for triggering UDP flood attack prevention.
Use undo udp-flood threshold to restore the default.
Syntax
udp-flood threshold threshold-value
undo udp-flood threshold
598