HP FlexNetwork 7500 Series Command Reference Manual page 569

Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
source-ip-address: Specifies the IPv4 address for a blacklist entry.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv4 address
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not
specify this option if the IPv4 address is on the public network.
count: Displays the number of matching IPv4 blacklist entries.
Usage guidelines
If you do not specify any parameters, this command displays all manually added IPv4 blacklist
entries.
Examples
# Display all manually added IPv4 blacklist entries.
<Sysname> display blacklist ip
IP address
192.168.11.5
201.55.7.45
# Display the number of manually added IPv4 blacklist entries.
<Sysname> display blacklist ip count
Totally 3 blacklist entries.
Table 85 Command output
Field
IP address
VPN instance
DS-Lite tunnel peer
Type
TTL(sec)
Totally 3 blacklist entries
Related commands
blacklist ip
VPN instance DS-Lite tunnel peer
-- --
-- 2013::1
Description
IPv4 address of the blacklist entry.
MPLS L3VPN instance to which the blacklisted IPv4 address belongs. If
the blacklisted IPv4 address is on the public network, this field displays
hyphens (--).
This field is not supported in the current software version.
IPv6 address of the DS-Lite tunnel peer.
If the device is the AFTR of a DS-Lite tunnel, this field displays the IPv6
address of the B4 element from which the packet comes.
In other situations, this field displays hyphens (--).
Type of the IPv4 blacklist entry.
Remaining aging time of the IPv4 blacklist entry, in seconds. If no aging
time is set for the entry, this field displays Never.
Total number of IPv4 blacklist entries.
Type
Manual
Manual
554
TTL(sec)
10
Never