Portal Device-Id - HP FlexNetwork 7500 Series Command Reference Manual

mdc-admin
Parameters
ipv4-address: Specifies the IP address of an IPv4 online portal user.
all: Specifies IPv4 and IPv6 online portal users on all interfaces.
interface interface-type interface-number: Specifies an interface by its type and number. If you
specify this option, this command logs out all IPv4 and IPv6 online portal users on the interface.
ipv6 ipv6-address: Specifies the IP address of an IPv6 online portal user.
Examples
# Log out the online portal user whose IP address is 1.1.1.1.
<Sysname> system-view
[Sysname] portal delete-user 1.1.1.1
Related commands
display portal user

portal device-id

Use portal device-id to specify the device ID.
Use undo portal device-id to restore the default.
Syntax
portal device-id device-id
undo portal device-id
Default
A device is not configured with a device ID.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
device-id: Specifies a device ID for the device, a case-sensitive string of 1 to 63 characters.
Usage guidelines
The portal authentication server uses device IDs to identify the devices that send protocol packets to
the portal server.
Make sure the configured device ID is different than any other access devices communicating with
the same portal authentication server.
Examples
# Set the device ID of the device to 0002.0010.100.00.
<Sysname> system-view
[Sysname] portal device-id 0002.0010.100.00
269