Authentication-Timeout - HP FlexNetwork 7500 Series Command Reference Manual

authentication-timeout

Use authentication-timeout to specify the authentication timeout, which is the maximum amount of
time the device waits for portal authentication to complete after receiving a MAC binding query
response.
Use undo authentication-timeout to restore the default.
Syntax
authentication-timeout minutes
undo authentication-timeout
Default
The authentication timeout time is 3 minutes.
Views
MAC binding server view
Predefined user roles
network-admin
mdc-admin
Parameters
minutes: Specifies the authentication timeout in the range of 1 to 15 minutes.
Usage guidelines
On receiving a MAC binding query response from the MAC binding server, the device starts a
timeout timer for portal authentication. When the timer expires, the device deletes the MAC-trigger
entry for the user.
Examples
# Specify the authentication timeout as 10 minutes.
<Sysname> system-view
[Sysname] portal mac-trigger-server mts
[Sysname-portal-mac-trigger-server-mts] authentication-timeout 10
Related commands
display portal mac-trigger-server
binding-retry
Use binding-retry to specify the maximum number of attempts and the interval for sending MAC
binding queries to the MAC binding server.
Use undo binding-retry to restore the default.
Syntax
binding-retry { retries | interval interval } *
undo binding-retry
Default
The maximum number of query attempts is 3 and the query interval is 1 second.
Views
MAC binding server view
233