Reset Blacklist Statistics - HP FlexNetwork 7500 Series Command Reference Manual

reset blacklist statistics

Use reset blacklist statistics to clear blacklist statistics.
Syntax
reset blacklist statistics
Views
User view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command resets the counter for dropped packets for all blacklist entries.
Examples
# Clear blacklist statistics.
<Sysname> reset blacklist statistics
Related commands
display blacklist ip
display blacklist ipv6
rst-flood action
Use rst-flood action to specify global actions against RST flood attacks.
Use undo rst-flood action to restore the default.
Syntax
rst-flood action { drop | logging } *
undo rst-flood action
Default
No global action is specified for RST flood attacks.
Views
Attack defense policy view
Predefined user roles
network-admin
mdc-admin
Parameters
drop: Drops subsequent RST packets destined for the victim IP addresses.
logging: Enables logging for RST flood attack events.
Examples
# Specify drop as the global action against RST flood attacks in attack defense policy atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
579