HP FlexNetwork 7500 Series Command Reference Manual page 561

Syntax
In standalone mode:
display attack-defense scan attacker ipv6 [ [ local ] [ slot slot-number ] ] [ count ]
In IRF mode:
display attack-defense scan attacker ipv6 [ [ local ] [ chassis chassis-number slot slot-number ] ]
[ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify
the device. If you do not specify a card, this command displays information about IPv6 scanning
attackers for all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. This option is available only when you specify the
device. If you do not specify a card, this command displays information about IPv6 scanning
attackers for all cards. (In IRF mode.)
count: Displays the number of matching IPv6 scanning attackers.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPv6 scanning
attackers.
Examples
# (In standalone mode.) Display information about all IPv6 scanning attackers.
<Sysname> display attack-defense scan attacker ipv6
Slot 1:
IPv6 address
1002::20
Slot 2:
IPv6 address
# (In standalone mode.) Display the number of IPv6 scanning attackers.
<Sysname> display attack-defense scan attacker ipv6 count
Slot 1:
Totally 1 attackers.
Slot 2:
Totally 0 attackers.
VPN instance Detected on
-- Local
VPN instance Detected on
546
Duration(min)
782
Duration(min)