If-Match Acl - HP FlexNetwork 7500 Series Command Reference Manual

Syntax
display ipv6 nd raguard statistics [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify an interface, this command displays RA guard statistics for all interfaces.
Examples
# Display RA guard statistics.
<Sysname> display ipv6 nd raguard statistics
RA messages dropped by RA guard:
Interface
XGE1/0/1
XGE1/0/2
XGE1/0/3
XGE1/0/4
Table 97 Command output
Field
Interface
Dropped
Related commands
ipv6 nd raguard log enable
reset ipv6 nd raguard statistics

if-match acl

Use if-match acl to specify an ACL match criterion.
Use undo if-match acl to delete the ACL match criterion.
Syntax
if-match acl { ipv6-acl-number | name ipv6-acl-name }
undo if-match acl
Default
No ACL match criterion exists.
Views
RA guard policy view
Dropped
78
0
32
0
Description
Interface that received the dropped RA messages.
Number of RA messages dropped on the interface.
645