connection-limit number: Specifies the maximum number of TCP connections, in the range of 0 to
500. The value of 0 represents that the device does not accelerate the aging of the TCP connections
in a state.
Usage guidelines
This command takes effect after you enable Naptha attack prevention. If the number of TCP
connections in a state exceeds the limit, the device will accelerate the aging of the TCP connections
in the state.
Examples
# Set the maximum number of TCP connections in the ESTABLISHED state to 100.
<Sysname> system-view
[Sysname] tcp state established connection-limit 100
Related commands
tcp anti-naptha enable
tcp check-state interval
602