Radius Dscp - HP FlexNetwork 7500 Series Command Reference Manual

[Sysname] radius attribute extended Owner-Password vendor 122 code 80 type string
Related commands
attribute convert (RADIUS DAS view)
attribute convert (RADIUS scheme view)
attribute reject (RADIUS DAS view)
attribute reject (RADIUS scheme view)
attribute translate

radius dscp

Use radius dscp to change the DSCP priority of RADIUS packets.
Use undo radius dscp to restore the default.
Syntax
radius [ ipv6 ] dscp dscp-value
undo radius [ ipv6 ] dscp
Default
The DSCP priority of RADIUS packets is 0.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv6: Specifies the IPv6 RADIUS packets. If you do not specify this keyword, the command sets the
DSCP priority for the IPv4 RADIUS packets.
dscp-value: Specifies the DSCP priority of RADIUS packets, in the range of 0 to 63. A larger value
represents a higher priority.
Usage guidelines
Use this command to set the DSCP priority in the ToS field of RADIUS packets for changing their
transmission priority.
Examples
# Set the DSCP priority of IPv4 RADIUS packets to 10.
<Sysname> system-view
[Sysname] radius dscp 10
radius dynamic-author server
Use radius dynamic-author server to enable the RADIUS DAS feature and enter RADIUS DAS
view.
Use undo radius dynamic-author server to disable the RADIUS DAS feature.
Syntax
radius dynamic-author server
92