HP FlexNetwork 7500 Series Command Reference Manual page 623

Hide thumbs Also See for FlexNetwork 7500 Series:
Table of Contents

Advertisement

Syntax
In standalone mode:
display ipv6 source binding pd [ vpn-instance vpn-instance-name ] [ prefix prefix/prefix-length ]
[ mac-address mac-address ] [ vlan vlan-id ] [ interface interface-type interface-number ] [ slot
slot-number ]
In IRF mode:
display ipv6 source binding pd [ vpn-instance vpn-instance-name ] [ prefix prefix/prefix-length ]
[ mac-address mac-address ] [ vlan vlan-id ] [ interface interface-type interface-number ] [ chassis
chassis-number slot slot-number ]
Views
Any views
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. To display IPv6SG prefix bindings for the public network,
do not specify a VPN instance.
prefix prefix/prefix-length: Specifies an IPv6 prefix. The value range for the prefix-length argument is
1 to 128. If you do not specify an IPv6 prefix, this command displays all IPv6SG prefix bindings.
mac-address mac-address: Specifies a MAC address in H-H-H format. If you do not specify a MAC
address, this command displays IPv6SG prefix bindings for all MAC addresses.
vlan vlan-id: Specifies a VLAN ID in the range of 1 to 4094. If you do not specify a VLAN, this
command displays IPv6SG prefix bindings for all VLANs.
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify an interface, this command displays IPv6SG prefix bindings for all interfaces.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays IPv6SG prefix bindings for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
IPv6SG prefix bindings for the global active MPU. (In IRF mode.)
Usage guidelines
IPv6SG prefix bindings are dynamically obtained from the DHCPv6 snooping module.
Examples
# Display all IPv6SG prefix bindings.
<Sysname> display ipv6 source binding pd
Total entries found: 2
IPv6 prefix
2012:1111::/64
2012:2222::/64
MAC address
Interface
000f-2202-0435
XGE1/0/1
000f-2202-0436
XGE1/0/2
608
VLAN
1
2

Advertisement

Table of Contents
loading

Table of Contents