Ssh Server Authentication-Timeout - HP FlexNetwork 7500 Series Command Reference Manual

ssh server authentication-timeout

Use ssh server authentication-timeout to set the SSH user authentication timeout timer on the
SSH server.
Use undo ssh server authentication-timeout to restore the default.
Syntax
ssh server authentication-timeout time-out-value
undo ssh server authentication-timeout
Default
The SSH user authentication timeout timer is 60 seconds.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
time-out-value: Specifies an authentication timeout timer in the range of 1 to 120 seconds.
Usage guidelines
If a user does not finish the authentication when the timeout timer expires, the connection cannot be
established.
To prevent malicious occupation of TCP connections, set the authentication timeout timer to a small
value.
Examples
# Set the authentication timeout timer to 10 seconds for SSH users.
<Sysname> system-view
[Sysname] ssh server authentication-timeout 10
Related commands
display ssh server
ssh server compatible-ssh1x enable
Use ssh server compatible-ssh1x enable to enable the SSH server to support SSH1 clients.
Use undo ssh server compatible-ssh1x [ enable ] to restore the default.
Syntax
ssh server compatible-ssh1x enable
undo ssh server compatible-ssh1x [ enable ]
Default
The SSH server does not support SSH1 clients.
Views
System view
448