Password-Control Length - HP FlexNetwork 7500 Series Command Reference Manual

Predefined user roles
network-admin
mdc-admin
Parameters
max-record-number: Specifies the maximum number of history password records for each user. The
value range is 2 to 15.
Usage guidelines
When the number of history password records reaches the maximum number, the subsequent
history record overwrites the earliest one.
The system stops recording passwords after you execute the undo password-control history
enable command, but it does not delete the prior records.
To delete the existing records, use one of the following methods:
•
Use the undo password-control enable command to disable the password control feature
globally.
•
Use the reset password-control history-record command to clear the passwords manually.
Examples
# Set the maximum number of history password records for each user to 10.
<Sysname> system-view
[Sysname] password-control history 10
Related commands
display password-control
password-control history enable
reset password-control blacklist

password-control length

Use password-control length to set the minimum password length.
Use undo password-control length to restore the default.
Syntax
password-control length length
undo password-control length
Default
In non-FIPS mode:
The global minimum password length is 10 characters.
In FIPS mode:
The global minimum password length is 15 characters.
In both non-FIPS and FIPS modes:
The minimum password length for a user group equals the global setting. The minimum password
length for a local user equals that of the user group to which the local user belongs.
Views
System view
User group view
346