Arp Detection Port-Match-Ignore - HP FlexNetwork 7500 Series Command Reference Manual

Syntax
arp detection log enable
undo arp detection log enable
Default
ARP attack detection logging is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable ARP attack detection logging.
<Sysname> system-view
[Sysname] arp detection log enable

arp detection port-match-ignore

Use arp detection port-match-ignore to ignore ingress ports of ARP packets during user validity
check.
Use undo arp detection port-match-ignore to remove the configuration.
Syntax
arp detection port-match-ignore
undo arp detection port-match-ignore
Default
Ingress ports of ARP packets are checked for user invalidity.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command configures ARP attack detection to ignore the ingress port information of ARP
packets when the packets are compared with the entries used for user validity check.
Examples
# Ignore ingress ports of ARP packets during user validity check.
<Sysname> system-view
[Sysname] arp detection port-match-ignore
Related commands
arp detection enable
629