External Scale Deviation
Automatic Motor Recognizing Function
Display of Analog Input Value (Front Panel Only)
Input voltage value [V]
Input signal
•Select the signal No. to be monitored by pressings
Note) Voltage exceeding ± 10V can not be displayed correctly.
Switching of the Driver to be Communicated
.........Displays the ID of the connected driver. ID cannot be switched.
.........Select the ID of the driver to be operated by pressing
Initial display of LED of the selected driver will appear by pressing
• Polarity
(+) : CCW,
Limited by ± 999999.
Note) You can 0-clear the external scale deviation during
normal auto-gain tuning and motor trial run.
Automatic recognition is valid.
(SPR analog input value, unit [V]) Displays the value after offset correction.
(CCWTL analog input value, unit [V])
(CWTL analog input value, unit [V])
RS232 communication
RS485 communication
will appear when you select the ID of not-selected driver .
(-) : CW
.
[Preparation]
.
.
67