Initial Status Of The Front Panel Display(7 Segment Led); Initial Status Of The Console Display(7 Segment Led) - Panasonic minas a4 series Instruction Manual

Initial Status of the Front Panel Display (7 Segment LED)
Front panel display shows the following after turning on the power of the driver.
approx. 2 sec
approx. 0.6 sec
approx. 0.6 sec
Initial Status of the Console Display (7 Segment LED)
Turn on the power of the driver while inserting the console connector to the driver main body, or inserting the
console connector to CN X4 connector.
approx. 0.6 sec
[flashes for approx. 0.6 sec each for initialization of the console]
When ID No. of the driver is other than "0"
• In case of communication with RS232 only
1 sec
• Release of RS232 communication error
When RS232 communication error occurs
as the Fig, below shows, release it by
pressing and
Initial display of LED (Determined by the setup of
...
Parameter, Pr01 "Initial status of LED".)
approx. 0.6 sec
Displays version No.
of micro computer of
the console. (Displayed
figures vary depending on
the version)
Displays ID No. of the
Driver. (data of Para-
meter, Pr00)
Initial display of LED
(Determined by the
setup of Parameter
Pr01, "Initial Status of
LED".)
at the same time.
approx. 0.6 sec
When ID No. of the driver is "0"
• In case of communication with other drivers
which are connected via RS485
(Displays the version No. of this product.)
Dot flashes when RS485 is connected.
Set up ID of the connecting Driver
with
(Displays the version No. of this product.)
(ID of the selected driver)
Press
(approx.0.6sec)
Initial Status of LED
(ID of the selected driver)
• Release of RS485 communication error
When RS485 communication error occurs as
the Fig, below shows, release it by pressing
and at the same time.
[Preparation]
and .
59