Omron E5*D series User Manual page 58

2 Preparations
 Terminal Details
Do not connect anything to the terminals that are shaded gray.
Control output 1
Control output 1
D
Control output 2
Sensor Input
 Model Numbers
All E5ED models have universal sensor inputs, so the code in the model number is always "M."
E5ED-@@ @ @ @ M-@@@
 Terminal Details
Do not connect anything to the terminals that are shaded gray.
TC (thermocouple)
−
+
Precautions for Correct Use
• When complying with EMC standards, the line connecting the sensor must be 30 m or less. If
the cable length exceeds 30 m, compliance with EMC standards will not be possible.
• The sensor input is not electrically isolated from the internal circuits. If you use a grounded
thermocouple, do not connect one of the sensor input terminals to ground. (If the sensor input
terminals are connected to ground, errors will occur in the measured temperature as a result
of leakage current.)
2 - 18
RX
C
Relay output
Control output 1
D
E
F
QR
C
+
Voltage output
−
(for driving SSR)
E
Relay output
F
Sensor input
Pt (resistance
thermometer)
A
22
B
23
B
24
QX
C
+
Voltage output
−
D
(for driving SSR)
E
F
RR
C
Relay output
Control output 1
D
E
Relay output
Control output 2
F
I (current)
+
22
22
mA
23
23
−
24
24
E5@D Digital Temperature Controllers User's Manual (H224)
CX
C
+
Linear current
Control output 1
D
− output
E
F
V (voltage)
22
−
23
V
24
+