Table of Contents
Advertisement
6 Parameters
m-pv
This is one of the model parameters used for adaptive control. It expresses the PV variation character-
istic of the system.
This parameter is copied so that another Digital Controller can inherit the measured system character-
istics.
• The set value of this parameter is automatically calculated when autotuning is executed
while the Adaptive Control parameter is set to "Notification" or "Automatic update."
Function
• Do not change the set value of this parameter after it is calculated.
Setting
Related Parameters
Adaptive Control (Initial Setting Level): Page 6-45
See
See
m-mv
This is one of the model parameters used for adaptive control. It expresses the MV variation character-
istic of the system.
This parameter is copied so that another Digital Controller can inherit the measured system character-
istics.
• The set value of this parameter is automatically calculated when autotuning is executed
while the Adaptive Control parameter is set to "Notification" or "Automatic update."
Function
• Do not change the set value of this parameter after it is calculated.
Setting
Related Parameters
Adaptive Control (Initial Setting Level): Page 6-45
See
See
6 - 46
Model Creation PV Amplitude
Setting range
0.00 to 99.99
Model Creation MV Amplitude
Setting range
0.0 to 100.0
The control must be standard control and 2-PID
control.
The input type must be set for a temperature input.
The Adaptive Control parameter must not be set to
"Disabled."
Unit
Default
%FS
0.00
The control must be standard control and 2-PID
control.
The input type must be set for a temperature input.
The Adaptive Control parameter must not be set to
"Disabled."
Unit
Default
%FS
0.0
E5@D Digital Temperature Controllers User's Manual (H224)
Advertisement
Table of Contents
