Omron E5*D series User Manual page 228

5 Advanced Operations
Operating Procedure
5 - 82
This procedure outputs alarm 1 status to auxiliary output 1 during
operation (RUN). A library object is used to make the setting.
Alarm 1 RUN/STOP
Always OFF Always OFF
E5@D Digital Temperature Controllers User's Manual (H224)
Work bit 1
1. Select Logic Operation
Editor from the CX-Thermo
tree, and click the Start
Button.
2. Click the Import of Library
Button.
3. Select Library 1 from the
library list, and then click the
OK Button.