Omron E5*D series User Manual page 289

o1st
These parameters set the output signal for linear current outputs.
• Select 4 to 20 mA or 0 to 20 mA for the signal.
Function
Setting
trst
This parameter sets the output signal for the transfer output.
• Select 4 to 20 mA or 1 to 5 V.
Function
Setting
tr-t
• This parameter sets the transfer output type.
Function
OFF
Setting
Set point
Set point during SP ramp
PV
MV (heating)
MV (cooling)
*1 This function can be set for standard control Model, but the setting will be disabled.
 Related Parameter
See
See
Transfer Output Upper Limit and Transfer Output Lower Limit (Initial Setting Level): Page
6-56
E5@D Digital Temperature Controllers User's Manual (H224)
Control Output 1 Signal
Setting range Default
4-20: 4 to 20 mA
0-20: 0 to 20 mA
000
Transfer Output Signal
Setting range Default
4-20: 4 to 20 mA
1-5v: 1 to 5 V
000
Transfer Output Type
Transfer output type
*1
Control output 1 must be a linear current output.
4-20
There must be a transfer output.
4-20
There must be a transfer output.
Default
off off
sp
sp-m
pV
mV
c-mV
6 Parameters
6
6 - 55