Omron E5*D series User Manual page 249

o
This parameter is used to monitor the manipulated variable for the heating control output during opera-
tion.
• During standard control, the manipulated variable is monitored. During heating/cooling
control, the manipulated variables on the control output (heating) is monitored.
• The default parameter mask settings mask (hide) this parameter.
Function
Monitor
 Related Parameters
See
See
Parameter Mask Setting (Advanced Function Setting Level): Page 6-95
Parameter Mask Enable (Protect Level): Page 6-4
c-o
This parameter is used to monitor the manipulated variable for the cooling control output during opera-
tion.
• During heating/cooling control, the manipulated variable on the control output (cooling) is
monitored.
• The default parameter mask settings mask (hide) this parameter.
Function
Monitor
 Related Parameters
See
See
Standard or Heating/Cooling (Initial Setting Level): Page 6-44
Parameter Mask Enable (Protect Level): Page 6-4
E5@D Digital Temperature Controllers User's Manual (H224)
MV Monitor (Heating)
Control Monitor range
Standard −5.0 to 105.0
Heating/cooling 0.0 to 105.0
MV Monitor (Cooling)
Control Monitor range
Heating/cooling 0.0 to 105.0
Unit
%
%
The control system must be set to
heating/cooling control.
Unit
%
6 Parameters
MASK
MASK
6
6 - 15