Omron E5*D series User Manual page 321

pfd1
pfd2
pfd3
pfd4
pfd5
• When the PF Key is set to display monitor/setting items, pressing the PF Key will display
in order the contents of the Monitor/Setting Item 1 to 5 parameters. The contents of these
parameters are shown in the following table. Refer to the relevant parameters for the
Function
setting/monitor ranges.
• The default value for the Monitor/Setting Item Display 1 parameter is 1.
The default value for the Monitor/Setting Item Display 2 to 5 parameters is 0.
*1 With the E5CD or E5CD-B, only the PV and SP can be displayed.
*2 If the display condition is not met for even one of the set parameters, the monitor/setting item
display will not appear.
E5@D Digital Temperature Controllers User's Manual (H224)
Monitor/Setting Item 1
Monitor/Setting Item 2
Monitor/Setting Item 3
Monitor/Setting Item 4
Monitor/Setting Item 5
Set
Setting
value
0 Disabled
1 PV/SP/Multi-SP No.
2 PV/SP/MV (Heating)
3 PV/SP/Soak time remain
4 Proportional band
5 Integral time
6 Derivative time
7 Alarm value 1
8 Alarm value upper limit 1
9 Alarm value lower limit 1
10 Alarm value 2
11 Alarm value upper limit 2
12 Alarm value lower limit 2
13 Alarm value 3
14 Alarm value upper limit 3
15 Alarm value lower limit 3
16 Alarm value 4
17 Alarm value upper limit 4
18 Alarm value lower limit 4
19 PV/SP/Internal SP
20 PV/SP/Alarm Value 1
21 Proportional Band (Cooling)
22 Integral Time (Cooling)
23 Derivative Time (Cooling)
24 PV/SP/MV (Cooling)
The PF Setting parameter must be set to PFDP.
*2
Monitor/Setting
Can be set. (SP)
Can be set. (SP)
Can be set. (SP)
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set.
Can be set. (SP)
Can be set. (SP)
Can be set.
Can be set.
Can be set.
Can be set. (SP)
6 Parameters
MASK8
Remarks
Display
---
---
*1
*1 ---
---
*1
p
i
d
al-1
al1h
al1l
al-2
al2h
al2l
al-3
al3h
al3l
al-4
al4h
al4l
---
*1
*1 ---
c-p
c-i
c-d
*1 ---
6 - 87
6