Omron E5*D series User Manual page 304

6 Parameters
mav
• This parameter sets the number of inputs to include in the moving average. The data after
moving average processing is illustrated in the following figure.
Function
• Use a moving average to suppress rapid changes in the input.
Setting
*
ret
• In the Operation Level, Adjustment Level, or Monitor/Setting Item Level, the display
automatically returns to the PV/SP if there are no key operations for the time set for this
parameter.
Function
• The automatic display return time is disabled when the parameter is set to OFF. (In that
case, the display will not be automatically switched.)
Setting
brgt
This parameter sets the display brightness to one of three levels. Adjust the level if the dis-
play is too bright.
Function
1 (dark) to 3 (bright)
Setting
6 - 70
Moving Average Count
Input data
Setting range
OFF, 2, 4, 8, 16, or 32
The default is 8 for models other than the E5D--8.
Automatic Display Return Time
Setting range
OFF, 1 to 99 Seconds
Display Brightness
Setting range
Operation result
Time
Unit Default
Times OFF*
Unit Default
off
Default
3
E5@D Digital Temperature Controllers User's Manual (H224)
MASK8