sp-n
This parameter is used for adaptive control.
• This parameter sets the coefficient that is used during a transitional state in adaptive
control.
Function
• The set value of this parameter is automatically calculated when autotuning is executed
while the Adaptive Control parameter is set to "Notification" or "Automatic update."
• This parameter is not displayed while the Adaptive Control parameter is set to
"Notification" or "Automatic update." You can check the set value through
communications.
• Do not change the set value of this parameter after it is calculated.
Setting
Related Parameters
Adaptive Control (Initial Setting Level): Page 6-45
See
See
E5@D Digital Temperature Controllers User's Manual (H224)
SP Response Coefficient Number
Setting range
0 to 9999
The control must be standard control and 2-PID
control.
The input type must be set for a temperature input.
The Adaptive Control parameter must be set to
"Fixed."
Default
0
6 Parameters
6
6 - 29