Table of Contents
Advertisement
pvst
• This parameter sets a control or alarm status that is displayed alternately in 0.5-s cycles
on the No. 1 display when the PV is set to be displayed in the No. 1 display.
• PV
Function
• PV/SP
• PV/Manual MV
• PV/SP/Manual MV
*1
This includes the displays specified with the PV/SP No. 1 and PV/SP No. 2 Display Selection
parameters.
*2
This includes when the PV/SP is selected for the Monitor/Setting Item parameter.
off:
Setting
manu:
stop:
alm1:
alm2:
alm3:
alm4:
alm:
ha:
Related Parameters
See
See
Process Value/Set Point (Operation Level): Page 6-8
PV/MV (Manual MV) (Manual Control Level): Page 6-39
E5@D Digital Temperature Controllers User's Manual (H224)
PV Status Display Function
*2
No PV status display
MANU is alternately displayed during manual control.
STOP is alternately displayed while operation is stopped.
ALM1 is alternately displayed during Alarm 1 status.
ALM2 is alternately displayed during Alarm 2 status.
ALM3 is alternately displayed during Alarm 3 status.
ALM4 is alternately displayed during Alarm 4 status.
ALM is alternately displayed when Alarm 1, 2, 3, or 4 is set to ON.
HA is alternately displayed when an HB alarm or HS alarm is ON.
Setting range
6 Parameters
*1
Default
off
6
6 - 89
Advertisement
Table of Contents
