Cisco Catalyst 4500 Series Configuration Manual page 626

power redundancy-mode
Table 2-18
Power Supply
One side at 220VAC + 220VAC +
220VAC, the other at 220VAC +
220VAC
One side at 220VAC + 220VAC +
220VAC, the other at 220VAC
One side at 220VAC + 220VAC, the
other at 220VAC
1. Power supply output drawings should not exceed the total power.
Examples The following example shows how to set the power management mode to combined:
Switch(config)# power redundancy-mode combined
Switch(config)#
Related Commands Command
show power
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-586
Power Output in Combined Mode for the 9000 W AC Power Supply
12V (data) (W)
2939
2168
2168
Description
Displays information about the power status.
1
Total Power
-50V (PoE) (W) (W)
11250 13440
8300 9890
6225 7410
Chapter 2